Joined in 2023 
82 
63 About this deal
What we’re saying is that this test will create an objective hierarchy, but that in all reality, a couple degrees here-and-there from the cooler won’t really matter much when considering the VRM is unlikely to melt itself in the majority of instances. Included with the Liquid Freezer II are three 120mm P Series fans, preinstalled to the radiator for convenience.
The X72 and EVGA CLC 360 do poorly here, mostly because the noise requirement is low enough while the fans are small and plentiful enough that they struggle to reach the static pressure required to compete with the 280 CLCs. Used item, tested and fully working, item has some bent fins and some broken plastics on one fan connector, wires have been moved so the item will require rewiring for a tidy finish.You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. I still feel that Arctic missed an opportunity by not making the VRM fan LED lit also, but the clean cable management thanks to just two trailing wires is absolutely superb. Check your clearance for the reassuringly thick radiator + fans if hoping to cram it into something smaller. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.
This puts it about equal in thermal performance to the NZXT Kraken X62 and X72, which run around 51-53dBA, or a perceived noise increase to the human ear of about 2x. Excellent cooling, Very quiet and Amazing Value Literally the only slight issue I had with this cooler is the AMD mounting system, where a third hand would help. To still allow for optimal heat dissipation, we have developed a special mounting kit for the Liquid Freezer II that allows the cold plate to be placed directly over the hotspot of the CPU. This allows for any air build-up to be at the top of the radiator where it wont affect the system performance and also the system runs a lot quitter without the gurgling water sounds if the inlet/outlet pipes are at mounted at the top. These are packaging revisions, not the revisions of the actual pump assembly, there are 2 of these - most reviewers demonstrated the rev that reported pump speed, only GN went back later and did a comparison of the review sample and a newer retail sample and demonstrated differences to the cabling for the vrm fan and that it now reports fan rpm.
While this increase in radiator thickness does, in theory, offer greater cooling capacity, it also comes with the drawback of requiring higher pressure fans to effectively flow air through the fins. Arctic’s Liquid Freezer II 360 is a top-tier cooler with superb acoustics, capable of cooling over 290W, for excellent sustained performance when paired with Intel’s i9-13900K. It can be annoying to install the block alone because even if the backplate is now held by the stand off's. The Liquid Freezer II features a completely newly, in-house developed PWM-controlled pump with a copper base, improved efficiency, a low power usage and quiet operation.
Installation of the Liquid Freezer II 360 A-RGB is not particularly difficult, though it is a little more time consuming than a typical Asetek AIO. These review need so other chart, its not easily to constantly switching between Noise and Performance chart. Last but not least, the cooler has a small embedded fan at the cooling block, totally silent, but that actually functions as a VRM-fan at a size of 40mm and tweakable 1000-3000rpm.
Coolers purchased from resellers, however, may still have been shipped without the corresponding accessories. I was wondering how good the fans would be as case fans over my silent wings 3 since they are so quiet. months now I use the liquid freezer II 240 with paste mx-4 and the 5600x has not exceeded 70 degrees Celsius although I have it at 4. The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15 C.
This makes installation easy and tidy: you only have to connect one connector to the mainboard, and there are no other cables to hide.This is good for cooling by allowing for a larger amount of liquid to be used in the circuit while also increasing the overall cooling surface area. They can be connected to the splitter cable (which is sleeved alongside the tubes), but we prefer connecting our fans directly to the motherboard to exercise more control over the fans. Positioned on the upper side of the pump block unit, Arctic believes that this solution should provide competent levels of airflow to nearby VRM heatsinks.
Great Deal 
New Comment