Air Locker AP700 Nailer/Nail Remover Kit with Extra Driver

Product Information

com/p/NuMax-Pneumatic-9-Gauge-to-14-Gauge-Punch-Nailer-Nail-Remover-SPNNR/308547929" on this server. It knocked about 45% of the nails out completely from the boards but the nails were large ones and my air compressor would not get over 120psi. As pallets are assembled with a nail gun, and often using ring-shank nails that are really hard to pull out, you should find something there to suit you.

But can't you just carefully prise off the cladding anyway, the nail will either pull out of the frame or be pulled through the cladding. Every project needs a different tool and these pneumatic nail remover can be used to fasten almost all materials from paper to roofing felt. Insert the exposed sharp end of the fastener into the nose, bend the nail to an appropriate position and fire. We have framing nail guns, finish nailers, staplers and brad nailers to suit whatever project you are working on.I tested this tool on some dried white oak that had spiral nails in it and it handled it like a champ. If the above is possible, then you may still end up with a very small amount of damage around the hole, where you've had to drive in the nail-punch, but that still might be more palatable than risking more general damage to the cladding by prising the strips off with a prise-bar, and as Paul has already suggested, you can use some fixings with a larger head to re-apply the cladding, which would then cover any local hole-damage that you might apply with the nail-punch. I purchased 1700 square foot of 80 year old 2x6 tongue and groove boards 12 foot to 16 foot long each. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . The tool's pneumatic operating system means that it has an impressive range of operational temperatures, and its small size means squeezing into a tight space is no problem.

Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page. Then when the cladding was refixed (but not back in exactly the same place) I used the existing holes in the cladding and used round head galvanised nails and tapped them flush.Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH). WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. Sometimes I have to remove sheets of board nailed down at about 1 foot centres over joists or floorboards. is an Australian owned and operated tool supplier located in Brisbane who specialise in power tools, air tools, hand tools, cordless tool as well as welding equipment and safety gear. There are examples of ready made and do it yourself tools that will separate pallets into their constituent parts.