Fiddes Supreme Wax is almost odour free, applies easily and once polished to the desired sheen level, gives a depth of finish that revives and protects any original shiny surface while preserving the patina. The Clear / Light variant is suitable for use as a final finish after using Fiddes Liming Wax. Complete the look with a matching Bespoke Triangle Base reclaimed dining tableand reclaimed wood benchfor the perfect dining set. Rugger Brown - a rich oak colour and the final finish will vary from a medium to a dark oak look depending on the timber used. Apply the wax using very fine 0000 wire wool or buffing cloth in the direction of the grain and allow soaking into the wood. Take a clean cotton cloth, sponge or brush and apply in the direction of the wood grain where possible. To obtain a uniform colour, always wipe evenly, blending the Supreme Wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Supreme Wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern.

With hundreds of products on the market, it can be hard to know where to start when looking for a wax to use on your dining table. Our beautifully handcrafted Chunky X Frame rustic dining table combines characterful rustic wood with an industrial style steel frame to create statement pieces of furniture. Light Brown – Mainly used on lighter timbers that you want to add a subtle shade and warmth to the grain of the wood. Take a clean cotton cloth, sponge or brush and apply in the direction of the wood grain where possible. To obtain a uniform colour, always wipe evenly, blending the Supreme Wax over the whole surface area by exerting a small degree of pressure when applying by hand. Take care to lightly remove any excess Supreme Wax immediately with a separate, clean absorbent cloth, again following the direction of the grain pattern. Leave to dry for around 3 minutes, and buff to finish with a soft cloth. The application of additional coats will deepen the existing colour / shade and significantly enhance the resulting sheen level.

What colour wax should I use?

High quality jointed oak picture shelves - these are biscuit jointed (similar to tongue and groove) for strength. Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer’s instructions on the tin at all times.

Sand in stages, starting with a medium sandpaper through to a medium/fine grade, following the direction of the grain. Apply the product with even pressure using a cotton cloth, brush or sponge, again following the grain. Lightly wipe with a clean cloth to remove excess polish. Allow to dry and buff to your desired level of sheen with a soft cloth. Rugger Brown- a rich oak colour and the final finish will vary from a medium to a dark oak look depending on the timber used. Light– A clear wax that maintains the existing, natural colour of the wood without changing the colour too much. This is ideal if you want to show the grain without darkening the wood.Sustainable: Crafted in the United Kingdom from FSC certified, sustainably sourced rustic pine wood. Our bespoke furniture features high-quality, beautifully unique and sustainable timber creating individual charm and character. Reclaimed wood is a live material and responds to its natural surroundings and, like all living things, it ages. So over time you may notice the wood changing slightly as it adapts to your home. This is completely normal. By not using ‘mass manufactured perfectly straight timber’, unevenness is to be expected, so your wooden tops may not have completely flat surfaces and there may be slight gaps visible in between the timber joins. Sustainable: Crafted in the United Kingdom from British reclaimed and sustainably sourced rustic pine wood. Our bespoke furniture features high-quality, beautifully unique and sustainable timber creating individual charm and character.

By drill buffing brush - let the bristles do the work. If you push down on the bristles they will start to soften and remove the wax from the surface of the wood All Bespoke Collection furniture can be stained in various colours. The different colour options are shown below. Rugger Brown – This is a tone of brown mainly used on hardwoods such as Oak and Walnut but is also a good alternative on Elm and Pine woods for a slightly darker shade. Also available in 7 other shades: Cherry, Light Brown, Forest Brown, Stripped Pine, Antique Brown, Jacobean, and Light. When maintaining pre-waxed wood it is advisable to use a clear wax (Fiddes have a very lightly tinted wax called 'Light' for paler, wood coloured surfaces and a wax with no pigment at all called 'Clear' for painted surfaces or for surfaces which require no colour change). Additional coats offer an improved patina and overall durability. Fresh wax coats can be applied annually or as required. RepairWe have a selection of oak fireplace beams and mantels suitable for any fireplace, whether it’s natural or cleaned, curved or straight. These fireplace beams will create a magnificent feature in any room. Sand the surface using a fine sanding paper or pad. Always sand in the direction of the grain and remove any blemishes etc. prior to the application. Remove all sanding dust and test the chosen shade to ensure you are happy with the colour.