3M Perfect-It Gelcoat Light Cutting Polish & Wax Replaces Discontinued Product Boat Wax Marine Fibreglass Cleaner and Wax

Product Information

A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us. It produces excellent results but you must finish it off with a wax over the top otherwise your paint will go dull very quickly. If its spider web stype cracks that are holding either the polish paste or old wax - they will need cleaning out and filling properly. This gelcoat polish leaves a smooth, high gloss wax finish even on dark-colored gelcoats, and it protects the gelcoat surface against weathering. As you can see from the video above, using the 3M cutting/polishing compound does take quite a bit of elbow grease.

Fibreglass is a composite in that it is fibreglass and polyester resin it will have a polyester Gelcoat on the outside surface and it is this that you are polishing.Although polish can remove scratches and light oxidation too, it’s commonly used for adding smoothness and shine, while restoring the hull’s original color. Farécla Profile range includes a range of pastes and liquids for cutting and polishing the latest marine coatings.

Part of a Complete Range of Products for Gelcoat Cutting, Polishing, Washing and Waxing From buffing professionals to vehicle owners, the 3M Perfect-It Gelcoat Finishing products works great on boats, RVs and industrial gelcoat surfaces — new and used alike. However, the current label on the 3M Medium grade cutting wax polish there is now no reference for use on caravans or motorhomes. And I know I’ve said this many times already, but please don’t use this polish on your caravans painted aluminium panels. I /think/ the newer "coloured T-cuts" you mention have fillers built in (rather than just being an agressive cutting agent). That’s why in my post on how not to clean a caravan, I state that T-Cut, a common polishing cutting compound used on cars, should not be used on caravan painted panels.We only use this information for statistical analysis purposes and then the data is removed from the system.

You use less product even in warmer climates, yet it handles well and does not clog on the buffing pad. It is much easier to do this when your boat is out of the water - I do the hull when the boat is lifted for the annual antifouling. When this happens the polish effectively reduces in its cutting ability so giving nearly the same effect as using two or three polishes. For more information on Farecla products there is a good web site with useful techical information and guides at www.However, the current label for the light grade of 3M cutting compound wax polish does reference for use on caravans. Farecla's products are renowned for their quality and effectiveness, particularly in automotive and marine industries. Let it rest for a while, and after that, rinse it off with water and repeat this process to remove all the stains, scum and algae. However, they are really just a glaze, a quick solution (spray-on), as opposed to what this post is going to talk about, proper polishing. First job when cleaning a mould was to strip off all the old wax and dust that had coupled with it from the atmosphere, with acetone or cellulose thinners.