Joined in 2023 
82 
63 About this deal
Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields. feet) high when assembled, it is recommended to place the printer on a low table from the beginning, depending on your height.
Our commitment extends beyond just providing exceptional products; we are equally dedicated to delivering a seamless support experience. This is a mechanical switch, which must be attached to the print head via a magnet before starting the procedure. During the printing process, it becomes clear that less energy is needed to maintain the temperatures with increasing object height, since the fans remove less heat from the print bed for cooling.It can also be helpful to increase the stability of the printer somewhat, since the problems are probably caused more by vibrations than by a lack of material flow. It was not very well known in Europe until now, but it is gradually starting to make a name for itself thanks to its Delta type 3D printers, which it has made its speciality! Thus, the energy consumption measurement shows that the mainboard, motors and heating element of the hotend require about 55 watts in operation, and the heating element of the print bed requires another 220 watts. Thus, although the energy measurement with the Voltcraft SEM 6000 results in quite similar curves on average for the 3DBenchy test print, the individual measured values of the MKS firmware fluctuate strongly.
The QQ-S Pro looks like it'll be perfect for those who want the best possible prints with no waiting time or missed steps. QQ-S PRO is equipped with a 32-Bit motherboard and a separate MOS module, allowing for stable prints even at high printing speed.
Workhorse: no print failed, and any messier prints were because we should have better optimized the support settings. This machine is equipped with a self-levelling sensor, but a bit different from what I’m used to seeing on other machines. Nevertheless, for the computing hardware in 3D printers, the equations of motion are not easy to solve, because several square roots must be drawn for each motion. It is better not to expose the hotend to temperatures above 260 °C (500 °F), since PTFE loses its strength beyond this temperature.
Due to their length, the cables could get in the way of the axle slides and be damaged by friction or pinching. The limitations of linear-delta printers do become apparent with the Flsun QQ-S Pro, but they are manageable.A real advantage of the Delta printer is that you can create many higher objects one after the other.
Great Deal 
New Comment