The Hinge Doctor HA1D For Commercial Hinges

Product Information

If this happens place a 1/8" Allen wrench right behind the knuckles and between the 2 plates of the hinge and then push the door closed. GKL HA1D and HA3D The Hinge Doctor for Commercial Ball Bearing Hinges The Hinge Doctor® HA1D and HA3D is designed to adjust new, worn or improperly adjusted commercial ball bearing hinges that cause the door to sag or drag. Open the door only 3 to 4 inches past the point where it binds against the tool then remove the tool from the hinge, check the door and repeat if necessary. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.

Test your results and continue this process until the top vertical edge of the door stops rubbing the door frame or the door latch goes into the door strike hole smoothly. diameter hole and turn it into a 2-1/8” diameter (or larger) hole without the use of plywood, “C” clamps, measuring centers or drill fixtures. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged.If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. It's usually only necessary to adjust the top hinge, however if after you've adjusted the top hinge and there is still a large gap between the door and the frame (above the top hinge) them adjust the center hinge as well.

Slip the bracket into the hole and tighten the disc with the handy SK1 spanner key or screw the two discs onto the threaded rod. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

Our MDHA hinge bracket alignment bar is one of our newest products and is used for repairing bent hinge brackets on hollow metal doors. Having said this we do offer a model of this hinge modifying tool that does have an incorporated handle period. You can do it normally by slipping it over the worn hinge, and opening the door to adjust the hinge. Includes 3 snap-in Bridges ®, 2 blank faceplates (beveled and radius), screws, shims to adjust faceplate height, 1 ADD2D hole filler disc kit and brackets to convert kit to ADD1D disc kit.

The second method is to slip it over the hinge, and use an adjustable wrench, slip it into the slots on the tool, and manually adjust the hinge. American Key Supply™ is a leading distributor of professional hardware and locksmith supplies in the United States. The 24 inch MEGA Screwdriver / Impact Driver has the power to break rusty and corroded screws loose and remove them with ease. Various versions have evolved over the years, sometimes by accident, sometimes on purpose (injected humour and the like).It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum. The Hinge Doctor ® is designed to adjust new, worn or improperly adjusted hinges that cause the door to sag or drag.