Creality Official Ender 3 Pro 3D Printer with Flexible Magnetic Plate Resume Printing Printing Size 220x220x250mm, 3D Printer for Beginners

Product Information

I do most of my 3D printing in a conservatory at the moment, so I can open all the windows and roof vents. Note: Since the writing of this article, Creality released the new Ender 3 Neo series and Ender 3 S1 series. Ender 3 series printers do require a bit more assembly than some of Creality’s larger printers such as the CR-10 series, but if you are looking for the best low-cost 3D printer without sacrificing, the Ender 3 is an excellent choice. The changes on the Creality Ender 3 Pro are primarily focused around reliability and generally improved components. In addition, mounting this set is also super easy: remove the adhesive strip from the magnetic mounting plate to attach it to your print bed, stick the adhesive platform foil on the FlexPlate and attach the whole to the magnetic surface.

I have opened the printer and the scanner has a smudge but I doubt that that caused the malfunction because like I said, it was working 2 months previously. The model I used is the Benchy, a common benchmarking test used for this style of 3D printer that offers an insight into the performance of the printer when making difficult-to-produce geometry. The Creality 3D printer housing (L) ensures that the temperature in the print chamber is perfectly maintained. I have been able to notice light wear or run-in of the rolls, which is easy to clean off, not bad, and totally common.

After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed. The hot end is capable of getting up to 260C, hot enough to print any common materials such as PLA, PETG, and ABS. For a part printed with no changes to the software, I was satisfied with the overall quality of the Benchy.

Equipped with CR Touch, the 16-point automatic leveling can complete quickly with compensation for points' printing height on the heat bed. The Ender-3 Pro is still a bit nicer in that regard since the power supply is nicely enclosed, whereas if you take a look at the electronics of the U30 Pro, you come quite close to the connection terminals.At this point I checked the height of both sides against the top of the base extrusions using a steel rule, to make sure it was horizontal. We have new options for you to choose from that will help us to provide more relevant product recommendations. My end goal isn’t to make anything crazy, but I do occasionally like to test limits and I would like to speed up the process a bit without sacrificing quality (sonic pad). You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

Due to the dimensions of 235mm x 235m x 4mm, it also fits perfectly on the Creality 3D CR-20 (pro) and Creality Ender-5. The printer needs some careful construction and calibration before it can be used and you need to allocate 2 to 3 hours to do this properly. Firstly, I tightened the hex head button bolts through centre of each wheel as these were shipped slightly loose.The Ender 3 Pro’s Meanwell PSU does offer some improvement over the base model due to the more efficient fans, but it is a modest improvement.