Parcel tape can be a little better than sellotape but it will fail to work on the same principle as neither like water and will fail in a short period of time. We would not advise that the pool is left in direct sunlight. We would suggest setting the pool up in a shaded spot or using a gazebo or canopy to help protect the pool. You should not leave your repair in direct sunlight whilst it is drying as this may cause the repair to fail. Ensure it is undercover somewhere or covered up so it doesn’t get too hot. The following steps will guide you through how to fix a hole in a paddling pool. As long as you follow the steps you will find any hole fairly simple to repair.

Mould can occur if the pool is not completely dry when folded or put away. Humidity and dampness can cause mould to grow due to stagnant water.

DELIVERY COSTS

Google: Google's policy requires identification of each party that receives end users’ personal data as a consequence of using a Google product. Google also requires prominent and easily accessible information about the use of end users’ personal data. We have published information about Google’s uses of information on this link Whether you have an Intex paddling pool, Bestway paddling pool or another popular make of paddling pool. Finding and fixing a hole couldn’t be easier. Finding the Hole in your Paddling Pool If you are applying a patch to a hole in the water-filled section this should be placed on the outside area and not on the inside of the pool. To add extra strength to your repair, you can add a second patch on the inside of the pool. To locate the puncture on an inflatable liner it is best to apply diluted washing up liquid from a spray bottle to the surface of the whole liner and around the inflation valve. Bubbles should appear where the puncture is located.

Try not to allow any air bubbles to form as this will affect the bonding over longer periods of time. There are two types of holes that can appear in a paddling pool. The first is one that lets the water out and the second is one that lets air out and causes the pool to deflate. The first part of fixing a hole in a paddling pool is finding where the hole is located. Finding a hole that is letting water out is quite simple, you just need to look to see where water is escaping.

About 10x UNDERWATER ADHESIVE REPAIR PATCH

If the hole is located in an area away from water for example in the top ring of your pool then you may be able to get away with not emptying or not completely emptying your pool. If the hole is not in the air ring but is allowing water out then you must drain your paddling pool before you apply the repair patch.