Ryzen 3600G with 16GB of RAM https://www.gigabyte.com/Motherboard/B450M-S2H-rev-10 (FreeNAS-11.3-U3.2 on 2 USB of 32GB)

ST1000DM010-2EP102 with Firmware 1001 - SMARTHDD Parameters of ST1000DM010-2EP102 with Firmware 1001 - SMARTHDD

not sure how I can fix it, but now I can think on how to fix it and other people too., the USB case is just a temporal fix, I just use it to test

Seagate Barracuda ST1000DM010 1tb 7200RPM 64MB Cache Sata Hard disk Drive

mm/0.787 in (Height), 101.85 mm/4.01 in (Width), 146.99 mm/5.787 in (Depth), 400 g/0.88 lb (Weight) Each line must contain only the serial number, a comma, and a model or part number followed by a new line. the next lines is EXTRA nothing to do with the problem just to clarificate the problem a bit more as how I fix it temporally Maak een einde aan de kosten en complexiteit van het opslaan, verplaatsen en activeren van gegevens op schaal.

ST1000DM010-2EP102 - TrueNAS Ramdom Disk reset on ST1000DM010-2EP102 - TrueNAS

EasyPC now delivers Nationwide! Express Delivery (4-hour delivery service) is available within Metro Manila

Firmwaredownloads

I put a laptop near of the server and when I try to create the pool I get this error on the UI interface: NOTE: the "Hardware ECC recovered" value didn't appear to be right and sometimes that value reset itself and look more like the number of sector read/writes on the disk, I get 62.100 M of errors and today have a raw value of 0x06B9 NOTE: I used the core2quad instead of the Ryzen by now as it have more sata ports to can test more things at the same time

Parameters of ST1000DM010-2EP102 with Firmware CC43 - SMARTHDD

Lyve: Periferie-naar-cloudplatform voor massaopslag Lyve Cloud: Voordelige objectopslag, ontworpen voor de multicloudand also isn't on the list of SMR drivers than are here https://www.ixsystems.com/community/resources/list-of-known-smr-drives.141/ Ryzen 3 3900X with 32GB of RAM https://www.asus.com/Motherboards/PRIME-X570-PRO/ (Linux Debian 10 & Linux Mint 20)