The purpose of a spark plug is to supply spark to the combustion chamber to ignite the fuel/air mixture from the intake manifold. It is essential in keeping the engine running, especially for automobiles that are manufactured with a gasoline engine. Blow away debris on the exterior of the spark plug area with a compressed air can. This’ll prevent any gunk from falling into the spark plug hole or combustion chamber — that could potentially cause engine damage.

Yes, you read that right. Using soda with a little bit of salt can help you clean your car’s spark plugs. Many automotive parts can be cleaned by soda as well, such as dirt on your car’s exterior and other components that form rust. With this, you don’t need to visit your local automotive shop to buy a dedicated cleaner. It’s not all about applying grease on a spark plug, but how and where you use it counts. Since dielectric grease is an insulator, you need to apply it on the spark plugs alone sparingly. Do not let it touch the metal connector on the boot. Take the grease with cotton wool and apply only a tiny amount.You’ll need to hold the spark plug with pliers to protect your hands from heat produced by the blowtorch. This is an essential safety measure, so you must take it seriously. Do not allow anything to distract you, and don’t let the torch burn anything else (burn only the threaded portion of the plugs). The burning process may take several minutes, depending on your torch and how hot it gets.

Using a spark plug cleaner is a relatively simple process. First, you'll need to remove the spark plug from your vehicle and insert it into the rubber grommet of the spark plug cleaner. Moreover, the spark plug cleaning process can contribute to the wearing of the edges. 2. When Do I Need a New Spark Plug? It requires brushing off the carbon deposits on the plugs with a wire brush and soaking the plugs with vinegar or petrol for a few seconds. Method 2: Using Blow TorchSpark plug cleaners are an invaluable tool for improving engine performance and longevity. With a wide range of models, sizes, and features available today, there’s something to fit every budget and application. Whether you’re looking for a basic cleaning solution or a more advanced model with powerful suction capabilities, research the categories and part number of the tool you desire before investing in one. Doing so will ensure you get the most out of your cleaner—and keep your vehicle running smoothly for years to come.

If the engine tries to turn over (even for a second) and dies, then you have spark. This would indicate the problem probably lies somewhere else (fuel, carburetor, valves, etc.). If the engine does not turn over at all, then there may be a problem with your ignition system. The first thing to do is change the spark plug. Turn on the knob on your propane touch or gas, then place the ignition source in front of the nozzle or hit the ignition button. This will ignite and keep it burning. Turn the torch up until it starts generating blue flames. Note: Wear gloves when scrubbing with a wire brush to prevent poking yourself. Step 5: Spray Brake Cleaner On the Spark Plug You don't want to waste your time or money researching and testing different products only to find that none work for you.Wd40 is produced to remove carbon deposits and fights moisture on several auto components like spark plugs and plug cables. The acronym WD stands for water displacement. So, if any part of your system components is wet and you want to wipe off moisture, wd40 is the guy to use. Note: Always use protective eyewear and a mask when using sandpaper. Step 3 (Optional): File Down the Dirt On the Electrode