About this deal
The Crosscut Station is super easy to use. After setting it up, everything will be in place for your first cuts. I’ve read quite a few comments on social media that were critical of the Crosscut Station. Comments like: If you aren’t confident in using a miter saw, or don’t have one at all, the Kreg Crosscut Station would be perfect for you. What are the cons of the Kreg Tool Crosscut Station?
The MDF base also functions as a kerf line so you can clearly see the blade's path and know exactly where your saw will cut every time. Use material support wings for safely cutting long boards and managing offcuts. The Kreg Crosscut Station turns a circular saw into a tool that makes accurate crosscuts and miter cuts. It’s easy to use, but is it right for everyone? Kreg Crosscut StationThe Crosscut Station is a great option for DIYers who have a miter saw, but their miter saw is mounted to a workbench. The Crosscut Station is portable so it works well for doing projects in the yard or to help with a project at a buddy’s house. You need to set the guide rails depending on your circular saw so that it slides smoothly and is cutting in the middle of the Crosscut Station. The Crosscut Station is even compact enough to make it a portable cutting solution when you need accurate crosscuts and angle cuts on the go. Features• Crosscut up to 12" wide (305mm) and make a variety of miter cuts from 0° to 45°
It can also be used to make miter cuts from 5-degrees to 45-degrees. The width of the board that can be cut will depend on the angle of the miter cut. Can I Make Bevel Cuts?
Kreg Crosscut Use & Thoughts
Circular saws are versatile, but they don’t usually cut straight without a little help from a fence or a guide. The Kreg Crosscut Station turns a circular saw into a tool that makes accurate crosscuts and miter cuts.
Though you may think of a circular saw as awkward or tough to control, with the right setup circular saws are a great choice for ripping and crosscutting plywood. Cutting plywood is a fairly straightforward process, but results can vary depending on a number of factors. Essentially though, making cuts in plywood can be done in three steps.
Kreg Jig Crosscut Assembly
When cutting plywood, the good side — the one you want showing when you’re finished — should be facing down. This post is sponsored by Kreg Tool. All opinions are our own and our opinion is that we love Kreg Tool. Thank you for supporting the brands that make Charleston Crafted possible! You can use the the Crosscut Station to make any cuts you need, and it’s perfect for using on the go. Crosscuts are made across the grain of the wood or across the width of the board. Miter cuts are made diagonally across the grain of the wood or the width of the board. Crosscuts At this price point, quality of assembly and ability to adapt to most circular saws, the Kreg Tool Crosscut Station is a low cost, high reward buy that will easily help you on your next project.