Redex LOYRADD1501A Petrol Fuel System Cleaner 500ml

Product Information

Our Redex experts or ‘RedExperts’ were recently asked “what is the mix ratio for Redex?”– the mix ratio for Redex is 1 shot per 50 litres of fuel, which equates to 2.5ml per litre of fuel. Take a look at our video. Redex Petrol fuel additives can be used safely with new E10 fuel in E10 compatible cars, as well as with E5. How Much Should I Use? Given that the additives I’ve been using are not performance boosters as such, I wasn’t expecting to feel any noticeable differences to my car’s accelerative qualities. If that was the point, Redex has products like its Petrol Power Booster. Alternatively, I could just fill my tank with premium unleaded fuel, which has a higher octane level than regular unleaded and provides extra power. It still seemed to choke a bit more at first, but started to perform a bit better a few days later. Read less

Free Delivery is not available for Over-Sized parcels, such as Exhausts, Radiators & Headlamps - For details on these items please see the 'Oversized Items' section below. As I outlined in previous reports, the type of fuel additive that I’ve been using is a fuel system cleaner rather than an octanebooster. The goal isn’t to turn regular unleaded into premium unleaded by increasing the car’s octane number, but simplyto give all the tiny pipes and injectors a thorough clean so they can do their thing without being clogged up. Please note though, Redex has been safe-tested at 4 times the recommended dose, so please don’t exceed this. What is the Mix Ratio for Redex? Talking of de-carbonising,whilst attending Grantham Tech in the mid-late `70`s,amongst the various engines,cutaways etc we had in the w/shop dept ,there was a Commer 2-stroke diesel engine http://en.wikipedia.org/wiki/Commer_TS3 .Was told that on reaching the finite amount of carbon build-up that clearances on this fascinating engine allowed they would self de-carbonise whilst vehicle was on the move...probably not a nice vehicle to be following at such a time.As I’ve made clear previously, this isn’t a laboratory test in controlled conditions but rather a real-world trial that gives a decent indication of what any driver can expect in everyday life. Redex is fully compatible with E10 fuel and they’ve recently updated their formula to protect against possible corrosion from using E10 fuel, so it can be used in all petrol vehicles. Can Redex be used in a hybrid car?

Each Redex bottle clearly shows how many fuel additive doses it contains on the front label, with easy marking on the side. 1 dose, is determined around the average size tank size at 50Litres. Redex Petrol System Cleaner is a fuel additive specially developed to reduce emissions and restore performance in your fuel system. It is compatible with E10 fuel, and our new updated formula also protects against corrosion from E10 fuel, so it can be used safely in all petrol cars. The purpose of the Redex fuel system cleaners is to remove this build-up of deposits and keep the fuel injection system clean. By doing so, the fuel will burn more cleanly and therefore give you better performance and fuel economy as the engine is working more efficiently.Also, if your tank is larger or smaller than 50 litres you can still use the recommended dosage with same level of performance being achieved. Given that your engine creates dozens of explosions every single second, there’s a lot of combustion going on under your bonnet. With any burning of fuel, there will be deposits and debris that forms. Sometimes it’s obvious, like the ash that forms when you burn a log in a fireplace. Other times, like in your car’s engine, these deposits are microscopic, but the principle is the same. Over time, these deposits build up and affect your ability to keep burning the fuel properly. The principle with the fuel system cleaner additives is that a clean fuel system will perform more efficiently than a clogged fuel system, much like your heart being able to pump blood more freely through clear arteries than clogged ones. Clogged arteries also mean your heart has to work harder and is at greater risk of heart damage, and your engine is no different. Over time, clogged fuel injectors can potentially lead to expensive engine damage. Keep a look out for our new Petrol System Cleaner coming to stores soon, and look for the E10 logo.

It has markings on its side so you know how much to put in, but it's hard to judge once the bottle is upside down. The initial baseline figure of 30mpg is pretty indicative of my usual fuel economy result, although usually that’s relying on the car’s trip computer reading rather than direct measurement. Over about 2,000 miles of mainly commuting in three months, my average fuel consumption using the Redex fuel system cleaners was 31.1mpg. My driving circumstances in that time have been a pretty representative example of my usual activities, so superficially it looks like a 1mpg improvement since using Redex. I have used one quarter of it, 125ml, then added about 25 litters of 95 unleaded, I still had about 15 litters in my tank.As with Cataclean, we often get a lot of questions in our chat box regarding Redex and how best to use it. So we thought we’d write a short article covering the most common questions as well as providing the instructions from the manufacturer. Redex instructions Below is a table of my last recording before starting withthe Redex products, followed by one tank of the heavy-duty Redex Advanced 5-in-1 system cleaner and then six tanks using the regular Redex petrol system cleaner. Our petrol and diesel fuel system cleaners are supplied in 250ml and 500ml sizes. The smaller 250ml version contains two doses / shots and the 500ml provides 4 shots. Pour in one dose of Redex – The size of Redex bottle you have will determine the amount to pour in. A single dose will treat a 50 litre tank