Innokin Endura T18II, E Cigarette Vape Pen Starter Kit 1300mAh, Variable Wattage, E-Cig Top-Refill 2ml Tank with Airflow Control Vaping, Uses Prism Coil, Magnetic Dust-Proof-Cap, No Nicotine - Blue

Product Information

It turns out I was wrong again! Innokin have gone all old-school and made it bottom air-feed from the 510 connection, I had to give it a test draw with the tank off and it was a bit too loose, but screw it down onto the mod and the draw was bloody superb.In fact it was possibly the best tight ciggie like draw of any fixed airflow kit I have, including pods. The 1.7Ω coil looks to be a traditional vertical round wire build, I don’t know if it’s dual or single strand though, not that it matters as long as it delivers. Filling was effortless,the top section simply slides over to reveal the fill port.There was plenty of room to get your tip in (that’s what she said!) and the mechanism is firm enough that it shouldn’t accidentally flip open.Even if it did flip open, the silicon bladder should prevent it spilling. Operation The Innokin T18E replacement coils are a selection of cross-compatible coils that can be used with a wide range of Innokin kits and tanks. This includes the classic Endura T22E and Endura T18E vape tanks, as well as the Innokin M18 pod kit. They can also be used with the Innokin T22 Pro kit and T18 Pro Tank. Locate the micro-USB charging port on the side of the battery. This is where you will plug in the charging cable.

With no adjustments needed, vaping with the Endura T18E is as simple as pressing the fire button. Traffic-light LEDs behind the button indicate the battery charge status: Green for full power, Yellow for mid power, and Red for low power. The closer I looked at it, the more little details stood out, As you would expect with Innokin,the build quality and finish is superb.I often found myself admiring it during the photography. If you're experiencing leaking from the tank of your Innokin Endura T18E, there could be several reasons for this. Here are some common causes of tank leakage:As with earlier models, one of the Innokin Endura T18-X’s biggest plus points is most certainly its ease-of-use. Simple to set up and requiring minimal maintenance, it’s a great starter kit for those who are new to the world of vaping or even seasoned vapers who prefer a straight-forward and uncomplicated kit. Overfilling the tank: If you overfill the tank, it can cause leaking. Make sure to fill the tank only up to the fill line, and avoid filling it to the top. Connect the other end of the charging cable to a USB port on a computer or a USB wall adapter. It's important to use a reliable and compatible charging cable and adapter to ensure safe and efficient charging.

The kit includes the T18E tank, an 18mm diameter, 2ml capacity top-fill tank with Innokin Prism coil technology for an outstanding flavor profile that stays true to how liquid manufacturers intended.The battery is slim and elegant, with a stainless-steel finish that gives it a premium look and feel. The battery capacity of 1000mAh provides enough power to last for a full day of vaping without needing to recharge, and it has a pass-through charging feature, which allows you to vape while charging. The device also has a micro-USB port for easy charging. The 18mm Endura T18E tank has a 2ml e-liquid capacity and is made from stainless steel and Pyrex glass. Screw the top cap onto the tank, and let the device sit for a few minutes to allow the coil to fully absorb the e-liquid.

One specially designed T18E Pro 1.7 Ohm coil is included with every tank to get you started. Long-lasting they will support multiple refills. Replacements are easy to find and you can also pair this tank with the classic 1.5 Ohm and 2.0 Ohm T18E coils. To support these coils and the recommended MTL vaping style, this tank should be paired with either a high PG or 50/50 e-liquid. KEEP OUT OF REACH OF CHILDREN. IF SWALLOWED: Rinse mouth. IF ON SKIN: Wash with plenty of soap and water. Call a POISON CENTRE or a doctor/physician if you feel unwell. To avoid risk of fire, injury and/or damage to your E-Cigarette product or other property, only charge your E-Cigarette device with the equipment provided in your kit, or with compatible charging accessories. Includes: 1 x Innokin Endura T18e Prism Tank 1 x Innokin Endura T18e 1000mAh Battery 2 x 1.5 Ohm Prism Coils (1 x installed) 2 x Spare Drip Tips 1 x USB Charging Cable 1 x Endura Vape Stand 1 x User Manual. The Prism T18E Pro vape tank has been designed to allow for an inhale that feels similar to a cigarette, supporting MTL (Mouth To Lung) vaping. A redesign of the classic T18E tank, it features a 2ml capacity and can be paired with a wide range of e-liquid. Simple to use and maintain, it’s fitted with a 510 connection - which means you can pair it with a wide range of vape mods. Allow the battery to charge fully. The time it takes to fully charge your battery will depend on the battery capacity and the power output of your charging source. Typically, it takes around 2-3 hours to fully charge the Innokin Endura T18E battery.Main cause: If the coil in your tank is not installed properly or is damaged, it can cause leaking. Make sure that the coil is installed correctly and is tightened securely.