BI OBD Protector Anti-Theft Immobiliser for OBD Socket Cover for OBD Interface

Product Information

Tech-savvy criminals can use the On-Board Diagnostics (OBD) port fitted to modern cars to start the car and drive it away. Once installed, you will also need to ensure that mechanics or dealership technicians can access the port for maintenance or servicing. It was in 1996 that standards were used for the next iteration, known as OBD II or just OBD2. The ports used in vehicles improved greatly and had far more capabilities than their predecessors had. These standards are still in use today. All vehicles sold since that time follow the OBD2 standards. How Could a Thief Use This Technology?

No software or coded equipment involved, therefore there is no possibility of thieves overcoming the system. Consider purchasing a quality video surveillance system. Ensure cameras are properly placed and functioning for day and night time use. Familiarize yourself with the system so it can be reviewed and accessed easily I have fitted one of these to my 2018 Ducato PVC. The instructions are a bit confusing - I received useful advice from the Motorhome Fun forum on the fitting technique. My GF's Mazda CX3 fob is kept in a RFID card holder usually about 15 ft away from the front door. My ZR1 fob is in a drawer not in a RFID thing but the car is never outside in the driveway at night it's secured in my garage. Relocating the OBD port from the standard, easily accessible location is a popular option. An OBD wiring extension can be used to reroute the port to a different place on the car (often inside the glovebox).Vehicle owners are encouraged to consider the following safety tips to help prevent their vehicles from being stolen: Several automakers introduced computer interfaces for their own cars before the 1990s, but the push to standardize didn’t begin until 1991, when the California Air Resources Board (CARB) mandated that all cars sold in California needed some form of OBD capability. However, CARB didn’t issue standards for the systems until 1994. Known as OBD II, that standard was implemented for the 1996 model year and is still in use today. Previous iterations of OBD were retroactively classified OBD I.

https://www.protectavan.co.uk/vehicles/fiat/ducato-2006-present/ducato-2006-present-obd-port-protector An On-Board Diagnostics (OBD) is a system inside the vehicle that provides a diagnosis. It is beneficial in monitoring the condition of your vehicle, especially if it is experiencing problems. The system works by getting the data from the car’s components. When any servicing or diagnostic work is required, the Universal OBDsaver can simply be removed using the unique individual coded key supplied.

OBD has existed in various forms long before anyone ever uttered the words “infotainment” or “connected car.” It came about primarily because of two factors: The need to regulate emissions, and the mass adoption of electronic fuel injection by automakers beginning in the 1980s. Car theft happens more often than many people realize. There are more than 600,000 vehicles stolen each year in the United States alone. By understanding more about how thieves work and the techniques and tactics they use, it becomes possible to learn how you can better protect your vehicle. Just because you feel that you live in a safe neighborhood, or that you are in a location where car theft is not common doesn’t mean that it can’t happen to you. Instead of becoming a victim, it is time that you started to take action to give your car the added protections that it needs. There is no such thing as being too prepared. Ways to Keep Your OBD2 Anti-Theft Device and Port Safer The earliest OBD ports were introduced in the 1970s, and they became more prevalent on American cars in the 1980s. Californian legislation introduced in 1988 meant new cars sold there had to have basic OBD compliance.

It’s as simple as it sounds. Move the OBD from its most common position in the driver’s footwell to another location in the car. Some of the components of OBD are electronic control unit (ECU), sensors, diagnostic trouble code (DTC), and malfunction indicator lights (MILs). The EUC collects the DTC code and data. It can be accessed through the diagnostic link connector (DLC). The problem has made headlines, typically with attention-grabbing videos of how easy the process can be. A: The OBDS has been successfully tested and validated by several vehicle manufacturers. No manufacturer raised concerns about the warranty. You can see an example from a well-known manufacturer under this LINK .

It will allow them to bypass the alarm systems in the vehicle, so no one will know that there is anything amiss. It is possible for thieves to troll a range of different neighborhoods and find vehicles that are easy for them to steal when they are using these advanced technologies to obtain vehicles. How to Make Your Vehicle Safer Programming replacement keys, should a new spare be needed, can be done via the OBD port as well. Why is the OBD port a theft risk? Firstly, thieves get into the car by breaking the window in a way that doesn’t set off the ultrasonic alarm sensor. Then they attach a sophisticated reader to the on-board diagnostics connector and once connected they can disable your vehicle immobiliser, de-activate the alarm, code new keys and then drive away! All of this can be done in less than two minutes. Most OBD ports are located on the Right Hand Side of the vehicle on the under trim above your shin!

These early ports were capable of detecting emissions, and they could even minimize emissions by manipulating emissions control valves. However, the capabilities of those early ports could do little else. A frequency shielding bag or pouch that your key FOB is placed in will prevent the FOB signal from being amplified and copied. Keep in mind that auto manufacturers have learned to combat this style of theft by incorporating a motion sensor in the key FOB. Essentially, when the FOB is motionless for an extended period, it will go to sleep and will stop transmitting any information. New vehicles will soon all have keys with this sleep feature, which will hopefully mitigate this method of theft.An On-Board Diagnostics port is a standard connector used to access information from the various sensors and components in a car. Read on for information about what stealing a vehicle using the OBD port actually means, and the measures you can take to protect your car. So, what is an OBD port? By law, the data accessible by the OBD connector has to be openly available, meaning the vehicle manufacturer can’t encrypt the information. The OBD port was removed from the footwell, extended using a High Quality OBD Extension of ours and then relocated into the Glovebox! A simple but effective way of protecting your vehicle’s computer system. Remember the glove-box is just an example of a new location. The extension is 2m long so plenty of different locations around the vehicle that it can go.