Joined in 2023 
82 
63 About this deal
People in the working platform should not stand on the guardrails orlean out of the platform when it is elevated. In cases when people need to lean out of the platform to do work, ensure they wear appropriate personal protective equipment (PPE), which typically consists of a full body harness with lanyard attached to a suitable anchor point. Our aim is to offer high quality products at affordable prices with discreet worldwide delivery. Many chastity belts that we've seen on the market are incredibly expensive and we don't think that's particularly fair, so we do our best to offer the best devices for the lowest prices. All of our products are thoroughly tested to ensure that you receive a safe, quality item that you’re happy to use on a regular basis. Manufacturers must indicate clearly, by markings on the equipment and within the instructions, if the lifting machinery is intended for lifting people. Use of lifting equipment for lifting people The platform shall be in the correct position so that the person does not need to lean out to perform the work No assembly between the cage and the ring for comfort and safety. No risk of pinching the skin in an assembly of several elements.
According to the Management of Health and Safety at Work Regulations 1999 a risk assessment must be carried out before any work at height is done.
The selection and use of an appropriate and suitable method of access will depend on the nature of the task to be carried out, the frequency of occurrence, the duration of the work and the availability of equipment. Man cages can be made to accommodate 1 – 8 people. They come with a roof, door, mesh sides and have differing capacities depending of your needs. It is very important to choose the right cage to ensure that it suits your purposes as the variety of cages available are very broad. You can find different types of man cages such as:
Man cages are supplied to ensure that personnel can work as efficiently as possible, so the rails are built at half height. Attachment points are available to be used for lanyards and safety lines. Crane man cages need to be erected by chain and will have chain attachments on each corner of the cage /box.
Design and construction requirements for workplace lifting equipment
Our team of working at height experts are ready to discuss your specific needs and provide the right solutions - helping you reduce risk, remain compliant and staying safe when working at height. Man cages create a safe elevated workspace, they are also known as: man box, forklift cage, man carrying cage, man safety cage, man workbox, workbox, crane workbox, forklift workbox and there are even a few other less common names used to refer to a man cage.
Once you are in an ideal state and ready to attach the device, treat lubricant as your new best friend! Ideally use a water based lube that won’t interfere with the material of your device (silicone lube should not be used with silicone devices) and apply liberally to your genitals (shaft and testicles), you can also apply a small amount to the inside of the device but be aware you may then need to wear gloves to allow some friction to keep hold of the device during the next steps! Steer clear of any “tingle” or “heat” type novelty lubes and consider what will be best for your long-term comfort. 4. The base ring
The use of non-integrated platforms for planned work is not allowed as there is other purpose-built access equipment, such as the wide variety of mobile elevating work platforms (MEWPs), which are better suited to carrying out work at height tasks and are safer for the person using the platform. These are readily available for hire. The HSE advice on the use of these clarifies what the law says:
Great Deal 
New Comment