Ubiquiti UAP-AC-IW Unifi AP-AC-IW IN WALL Access Point - (Enterprise Computing > Wireless Networking)

Product Information

GHz signals extend this circle out a bit, but with a few walls in the way, getting low SNR links and slow performance is likely. If there is clear line of sight AP range can extend much further, but every wall imposes a dBm penalty. Wall material and quantity are usually more important than distance in a home or small business network. IMPORTANT: The UAP-AC-IW-PRO requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended.

End of Life (EOL): Device will be visible, but not configurable, in controllers released after the EOL date. It will continue to operate with its current configuration, and the controller will be able to forget the device. Dual band, 802.11ac Wave 1 access point with a 2+ Gbps aggregate throughput rate that can be plugged into a standard wall outlet. Posted Jan 2020: https://community.ui.com/questions/Announcement-EOL-for-some-UniFi-AP-models/65487283-ce9d-49f4-85b9-b6aa54659ef7 Unifi UAP-AC-IW คุณสามารถสั่งซื้อและติดตั้งได้อย่างง่ายดาย อย่าพลาดโอกาสที่จะเพิ่มประสิทธิภาพในการใช้งานอินเตอร์เน็ตไร้สายในพื้นที่ของคุณ I ran all of my tests with multiple TCP streams, and occasionally reversed the direction as a point of comparison. These tests ran for 60 seconds, so a typical client command would look like: iperf3 -c 172.25.10.5 -P 8 -R -t 60

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.

I want to reach out and announce that we are starting the EOL lifecycle for the following models of UniFi AP: The Access Point AC In-Wall (UAP AC IW) is a dual-band, 802.11ac WiFi access point that can be plugged into any standard wall outlet. The UAP AC IW can reach a 1.1+ Gbps aggregate throughput rate with its 5 GHz and 2.4 GHz bands, and it has an impressively long transmission range up to 100 meters (328 feet). This access point is also equipped with (3) GbE RJ45 ports, including (1) for PoE input, (1) for 48V PoE output, and (1) dedicated to data transmission. The UAP AC IW is the perfect plug-and-play access point for those looking for an easy-to-use, inconspicuous way to broaden their wireless coverage. It can be set up in minutes and fully managed with the UniFi Network web application or UniFi mobile app. An electrical wall box should be pre-installed with an Ethernet cable running from the box to a UniFi Switch with PoE. Regional regulations must be observed when deploying radio equipment. More info Power Input Power MethodIMPORTANT: The UAP-AC-IW requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended. Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series. (Requires Cat5e or higher) Wi-Fi 802.11ac คุณสามารถเชื่อมต่ออุปกรณ์อิเล็กทรอนิกส์หลาย ๆ ตัวของคุณให้สามารถใช้งานอินเตอร์เน็ตไร้สายได้อย่างรวดเร็วและมีความน่าเชื่อถือ ไม่ว่าจะเป็นสมาร์ทโฟน, แท็บเล็ต, คอมพิวเตอร์โน้ตบุ๊ค หรืออุปกรณ์อื่น ๆ

You may choose to restrict the collection or use of your personal information in the following ways: The Ubiquiti UAP-AC-IW isa dual-band 802.11AC WiFi Access Point powered from an Ethernet wall connection. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.We require this information to understand your needs and provide you with a better service, and in particular for the following reasons: The range difference between the U6-Lite/U6-Pro and the U6-LR is large enough that it could be the difference between needing one or two APs to cover an area. In some situations one U6-LR is better, in others two lower-power APs may be better. It is hard to make general conclusions. Devices will lose controller support in a controller version that is released AFTER the EOL date, and it will be clearly announced in release notes. In other words, it should be clear to the user before the upgrade happens, that the upgrade will terminate support. PoE In + Data 10/100/1000 Ethernet port supports data and 802.3at PoE+ input. The UAP-AC-IW-PRO itself requires 10W.

These results show how the AP performs when it’s 5 GHz signal is hovering around -80 dBm RSSI and around 10 SNR. From the same location 2.4 GHz connections are stronger and more stable. Note for International Readers Ubiquiti Networks Unifi UAP-AC-IW! อุปกรณ์แอคเซสพอยต์ติดผนังแบบ 2x2 ที่ให้ประสบการณ์การใช้งาน Wi-Fi 802.11ac คุณภาพสูง มอบความสะดวกสบายให้คุณในการใช้งานอินเตอร์เน็ตทุกครั้ง PoE+ input is required to use PoE passthrough. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server.Unifi UAP-AC-IW มาพร้อมกับซอฟต์แวร์ Unifi Network Controller ที่ให้ควบคุมและจัดการเครือข่ายของคุณได้ง่ายขึ้น ตั้งค่าเครือข่าย, ตรวจสอบสถิติการใช้งาน, และปรับปรุงความปลอดภัยของเครือข่ายของคุณ To test only the speed of the Wi-Fi connection between the client and the AP, my iPerf server was connected over gigabit Ethernet to my Switch Lite 8. I primarily used my dedicated pfSense box for this, but I also used my PC and laptop depending on what I was testing. Next, I switched over to my MacBook Pro and it’s 3 spatial stream Wi-Fi 5 radio. This is an interesting test because it shows the impact of an additional spatial stream, and removes the highest-end modulation (1024-QAM) and longer symbol duration of Wi-Fi 6. This is a more even playing field, and a chance for the 3x3 and 4x4 APs to show their strength.