APC Smart-UPS SMT - SMT1500RMI2U - Uninterruptible Power Supply 1500VA Rackmount 2U (Line Interactive, AVR, LCD Panel, 4 Outlets IEC-C13, Shutdown Software)

Product Information

LCD Display: an intuitive interface provides detailed and accurate information on UPS and battery performance Intelligent Battery Management: to maximise battery performance and help extend working life through temperature compensated charing

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Create a Support Ticket

Finance is only available to permanent UK residents aged >18, subject to status, terms and conditions apply. AB32, AB36 - AB38, AB40 - AB42, AB55, AB56, FK17 - FK99, G83, HS1 - HS9, IV1 - IV29, IV33 - IV63, KA27, KA28, KY1 - KY16, KW1 - KW18, PA20 - PA49, PA60 - PA78, PH17 - PH26, PH30 - PH44, PH49, PH50, ZE1 - ZE4

Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety Wide Input Voltage Range: 110-300Vac at 60% load (6 and 10kVA models) to reduce battery usage in areas with a widely fluctuating mains power supply Automatic Diagnostic Testing: automatic periodic battery self-testing to provide early indication that the UPS battery requires replacement Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement. Marketing features User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)The APC Easy UPS SMV series is available in 1kVA, 2kVA, 3kVA, 6kVA and 10kVA UPS sizes. APC Easy UPS SRV10KRIRK Applications Network manageable Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded. Serviceability Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449 Built-in Automatic Bypass: to safely transfer the UPS load(s) to the mains power supply if the UPS develops a fault condition or is overloaded This graph is based on actual measured runtime data. All measurements were taken with new, fully charged batteries and a balanced resistive load (PF = 1.0). Actual runtimes may vary from the values of this graph. Actual runtimes are dependent on several v