Joined in 2023 
82 
63 About this deal
The Smart Zero Fan inside the Toughpower GF A3 Gold series produces excellent airflow with an incredibly quiet 120 mm fluid bearing fan, as well as the ability to minimize undesired noise. Designed with our Smart Zero Fan, the fan only spins until the load reaches a certain percentage of the power supply, and the users can turn it on and off by its physical switch. To achieve the power efficiency of the PC system and the eco design, the Toughpower GF A3 Gold series supports Intel deep power down C6/C7 status. The rear details the efficiency, smart zero fan, low noise ripple design, strict voltage regulation, and connector and output specifications. Toughpower GF3 ARGB Gold has a 16-pin connector to offer robust and stable performance allowing the PSU to run next-generation GPUs natively. The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of the GF3 ARGB 850W can deliver up to 450W for PCIe 5.0 graphics cards. To ensure stability, the GF A3 Snow is made with single +12V rails for delivering power to reach the best compatibility, as well as designed with the LLC and DC to DC circuit for strengthening the voltage regulation.
The wattage marked on the 12VHPWR's connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of the GF A3 650 W & 750 W can deliver up to 300 W for PCIe 5.0 graphics cards. (850 W's 16pin cable: delivers up to 450 W, 1050 W & 1200 W's 16-pin cables: delivers up to 600 W) Toughpower GF A3 Gold Snow series saves energy through its high energy efficiency up to 90% and is certified to 80 Plus Gold. It has been optimized to work with all generations of Intel's processors to achieve maximum energy saving.
It features a 140mm fluid dynamic bearing fan to balance silence and superior cooling perfectly. Furthermore, the Smart Zero Fan will not spin until it reaches a specific temperature, minimizing the fan noise.
Offering masses of excellent features, some of the key highlights include the new PCIe Gen5 power connection as well as support for ATX 3.0. – Put simply, if you’re in need of a power supply and one that will definitely be set to stand the test of time (based on upcoming hardware releases – and especially so graphics cards) this is undoubtedly it! Thermaltake ToughPower GF3 1350W Power Supply Toughpower GF3 Snow comes with a 12+4-pin connector to offer powerful and stable performance allowing the PSU to run next-generation GPUs naturally. It’s also great to see Thermaltake keeping up with the latest specifications, as this GF3 ARGB 850w unit utilizes the latest Intel 3.0 ATX specification and PCIe Gen 5.0 GPU power connector.
High-quality Japanese 105°C/221°F main electrolytic capacitors offer stability and reliability which enhance the durability of the GF A3 Gold series. Also to anyone else following earlier posts of mine in this thread. The Hela 1200r sent a new production unit to Cybenetics and it has now passed atx 3.0 certification. Apparently they had sent a pre production unit first and that’s why it failed one of the transient load tests.
Put simply, whatever you fancy or whatever your hardware requires, there’s something for everyone here in the ToughPower GF3 series when it comes to power output. And let me make the point as well that it’s more than a little unusual to see six variants in any power supply series. Thermaltake definitely seems to be appealing to the masses with this one! Add your own comment Comments on Thermaltake Releases Toughpower GF3 1200W and GF A3 850W/1050W in Snow Edition With a final shot of the GF3 ARGB 850w installed inside the case with the RGB effect on display. It’s great to see bright LEDs with great clarity on offer, even on a PSU. Toughpower GF3 ARGB series saves energy through its high energy efficiency of up to 90% and is certified to 80 PLUS® Gold. The series has been optimized to work with all generations of Intel processors to achieve maximum energy saving. Thermaltake TOUGHPOWER GF3 ARGB 850w: Unboxing and Closer Look Thermaltake is undoubtedly a highly respected manufacturer of PC hardware, peripherals, and components. And especially so when it comes to their power supply designs. Representing one of the few companies who always seemingly have one eye on the future, however, we have recently seen the release of their brand new ToughPower GF3 series of PSUs.Electrolytic: 3x Nippon Chemi-Con (105°C, W), 1x Nichicon (2-5,000h @ 105°C, HD), 2x Nichicon (4-10,000h @ 105°C, HE), 1x Rubycon (6-10,000h @ 105°C, ZLH), 1x Nippon Chemi-Con (4-10,000h @ 105°C, KY), 1x Nippon Chemi-Con (4-10,000h @ 105°C, KYA) The voltage regulation of the GF3 Snow series complies with Intel's standard +5%, -7% for major rails, and GF3 1200 W Snow is set to no more than ±2% for major rails, providing steady clean power through exceptional voltage stability. To satisfy the increasing demand for the power consumption of graphics cards, the GF A3 Gold Snow series is designed to support NVIDIA and AMD graphics cards and is able to supply the graphics cards in different ways of connection. Featuring a 120 mm fluid bearing fan to deliver excellent airflow. Furthermore, the Smart Zero Fan will not spin until the load exceeds a certain percentage of the power supply, minimizing undesired noise.
Great Deal 
New Comment