Cyclaire Door Keyhole draught excluder (2 pack), neatly fitted in seconds it eliminates the draught through the keyhole, reduces heating bills, keyhole cover

Product Information

A final option is a brush draught excluder for keyholes. The bristles prevent chilly draughts but allow keys through. 4. Don't forget to deal with the letterbox

Mark every draught source and visit your DIY shed, or go online, and look for suitable remedial products. Believe it or not, your problem will not be unique — every possible draught has been considered and appropriate products produced. Where to Buy Draught Proofing SuppliesAreas to focus on are floor boards, skirting boards, where window and door frames meet the wall and the ceiling-to-wall junctions. The less obvious areas are keyholes, kitchen cupboards (where pipes are likely to penetrate walls), loft hatches and downlights.

Controlled ventilation will reduce condensation, maintain a healthy atmosphere and prevent damp and mould growth by letting in air where it is needed. Draughts, however, let in too much air in the wrong place at the wrong time, making draught proofing the cheapest and most effective way to save energy, and money, especially in older buildings How to Draught Proof Your Home 1. Draught Proofing Doors His interest in renewable energy and sustainability was first inspired by visits to the Royal Festival Hall heat pump and the Edmonton heat-from-waste projects. In 1979Tim is an expert in sustainable building methods and energy efficiency in residential homes and writes on the subject for magazines and national newspapers. He is the author of The Sustainable Building Bible, Simply Sustainable Homes and Anaerobic Digestion - Making Biogas - Making Energy: The Earthscan Expert Guide. Moving in 2002 to a small-holding in South Wales, providing as it did access to a wider range of natural resources, fanned his enthusiasm for sustainability. He went on to install renewable technology at the property, including biomass boiler and wind turbine. The difference between draughts and ventilation is one of control. Draughts are uncontrolled, while ventilation is ours to switch on and off at will. Home ventilation in the form of extractor fans and cooker hoods will ensure that condensation is properly dealt with, at source. Brush strips usually come in the form of a thin metal bar, with the brush fixed to the bottom. These bars can be cut to length and are normally screwed into place. Some are designed to slide onto the bottom of the door before being fastened with screws. You need to ensure that the bristles on the strip reach the floor.