GlowTub Underwater Remote Controlled LED Color Changing Light for Bathtub or spa - Battery Operated

Product Information

Zone 0, is inside the bath or floor of the shower. Any fitting used in this zone must be low voltage and be rated at least IP67 which is total immersion proof.

Bathroom Lights | Lighting Styles Zone 1 Bathroom Lights | Lighting Styles

Consider lighting the jewelry of your bathroom," says Bryan Johnson, CEO of Shades of Light. "Be sure to coordinate finishes within a bathroom, particularly between your mirror, faucet and lighting. They don’t need to match, but you do want each of these pieces to complement each other, especially when so close together. If you have a frameless mirror, this could allow you to focus more on the lighting or faucet." When selecting sink vanity lighting, consider who is using the mirror," Johnson says. "If someone is leaning in close to do makeup, opt for down lighting which provides better light for hair and makeup. Otherwise, an up light works well."Essentially good lighting for a bathroom is lighting that serves all purposes. Because we use bathrooms everyday, at all times of the day, the right bathroom lighting idea will ensure you have sufficient light at all times – whether showering or relaxing in the tub. Is an area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor. In this zone an IP rating of at least IP44 is required. In addition it is good practice to consider the area around a wash basin, within a 60cm radius of any tap to be considered as zone 2. No two bathrooms are the same. That’s why we offer a versatile range of LED bathroom lights and bathroom LED downlights to help you add some well-thought-out illumination to your home interiors. No matter the fittings you have available, we have the energy-saving LED products you need. For example, view our popular choice of lighting solutions for wall fixtures, suspended ceiling fixtures, and surface ceiling fixtures. Modern smart lighting controls allow pre-programmed settings to make life easier. Try wireless lighting controls, which are installed without cables – a safety consideration to take into account. Should bathroom lights hang over mirror?

LED Bathroom Lights | Indoor Lighting | Screwfix

When planning the lighting for your bathroom, remember that you want it to work equally well at all times of the day and throughout the year. Whether it's dark winter mornings or sunny summer evenings. Zone 1, is the area above the bath or shower to a height of 2.25m from the floor. A minimum rating of IP45 is required, but it is generally accepted that IP65 is to be used. Zone 1 is the area above the bath to a height of 2.25m from the floor. In this zone a minimum rating of IP44 is required. If the fitting is fed by 240v supply a 30ma residual current device (RCD) must also be used to protect the circuit in this zone. SELV - safety extra low voltage lighting can be used such as 12v fittings with 12v lamps but the transformer must be located in zone 3 i.e. in furniture, under the bath or in the ceiling void. That said fittings in zone 1 can still be damaged by water and by the damp environment and while you will be safe you from electrocution you may not want your fittings to rust and corrode.This area above the bath to a height of 2.25m from the floor. In this zone a minimum rating of IP44 is required. If the fitting is 240v a 30ma residual current device (RCD) must also be used to protect the circuit in this zone. This is inside the bath or shower itself. Any fitting used in this zone must be low voltage, (max 12v) and be rated at least IP67 which is total immersion proof.