Ubiquiti UniFi 6 Long-Range Access Point U6-LR

Product Information

There is also the need for WiFi 6 client devices and make no mistake, we’re nowhere near mass adoption.

Review of UniFi UDM Pro | Increase Broadband Speed Guide | What Realistic Speeds Will I Get With Wi-Fi 5 and Wi-Fi 6? And the antennas themselves are also properly labeled, so we know that there are two dedicated for the 2. PoE+ (PoE injector sold separately) and also features a Bluetooth Low Energy Radio for location based services.

By accepting all cookies, you agree to our use of cookies to deliver and maintain our services and site, improve the quality of Reddit, personalize Reddit content and advertising, and measure the effectiveness of advertising. With a normal 2x2 client, you’re more likely to effectively use 20 MHz channels with 150 Mbps data rates than 40 MHz channels with 300 Mbps. With Wi-Fi 6-enabled Apple products (equipped with 2×2 MIMO), we have been able to consistently achieve real, close-range throughputs to single devices up to 920 Mbps (using 80 MHz channels).

I tested both the latest stable firmware, and the latest beta firmware which lists improved Wi-Fi 6 connectivity in the change log. The panty is located roughly in the middle of the house (next to our stairs) and surrounded by sand-lime bricks. enabling a minimum RSSI (Received Signal Strength Indicator) to prevent distant devices from connecting to the Access Point (to improve overall quality). Beacon frames and other management traffic must be sent by the AP at the lowest supported data rate, to ensure all clients can understand them. So, optimally deploying several UniFi 6 Long Range devices in a home or business would finally do full justice to the fastest ultrafast broadband connections.While Wi-Fi 6 is more about efficiency improvement rather than speed enhancement, we still measured significant throughput increases. GHz processor with 512MB of RAM, which we assume is improved since Wi-Fi 6 is computationally much more intensive than Wi-Fi 5. Like 160 MHz channels in 5 GHz, there’s just not enough available frequency for them to be reliably used in most situations. The water and dust-resistant U6 LR can be mounted either indoors or outside, blending seamlessly into virtually any environment so you'll never have to disrupt your space's aesthetic to enjoy excellent wireless coverage.

The Ubiquiti UniFi U6-LRis apowerful wireless Access Point leveraging advanced WiFi 6 technology to provide powerful wireless coverage to enterprise environments.I reverted back to the current stable firmware to avoid any beta issues impacting my results, but performance could improve with 5. The UDM and AC-HD are able to compensate with better beamforming, and ended up performing slightly better than the U6-Lite from the furthest location.

Before discussing the practical performance of the UniFi 6 Long Range Access Point, it is important to realise that, unlike previous iterations of Wi-Fi standards, increasing speeds to individual client devices has not been the overriding objective with Wi-Fi 6. If you already run optimised Wi-Fi 5 Access Points and are happy with the performance, you don’t need to be in a rush to upgrade all your existing equipment. Furthermore, there has been a steady increase in the number of devices that are compatible with Wi-Fi 6. The bedrooms are located off one wing of the home with the furthest about 35-40 feet away from the AP.This raises maximum data rates from a 867 Mbps to 1200 Mbps for a typical 2 stream client over an 80 MHz channel. Previously, using UniFi Nano Wi-Fi 5 Access Points, we were able to consistently achieve throughputs of about 640 Mbps. Keep in mind though that your clients need to support WiFi 6 to fully benefit from these new features.